
Ni含量对FeCo基纳米晶合金高温磁性的影响
周龙, 王治, 贾芸芸, 葛桂贤, 唐光辉
Ni含量对FeCo基纳米晶合金高温磁性的影响
周龙1,王治2,贾芸芸2,葛桂贤1 ,唐光辉1
Effect of Ni Content on High-temperature Magnetic Properties for FeCo-based Nanocrystalline Alloys
ZHOU Long1 ,WANG Zhi 2 ,JIA Yunyun2 ,GE Guixian1 ,TANG Guanghui 1
采用循环加热、冷却过程中测定交流初始磁导率的方法,研究了纳米晶Nix(Fe0.5Co0.5)73.5-xNb3Si13.5B9Cu1(x=5,10,15,20,25,30)合金在由室温升至380730℃范围内的高温磁性与Ni含量的关系。结果表明:与双相纳米晶(Fe0.5Co0.5)73.5Nb3Si13.5B9Cu1合金相比,当Ni含量x≥15时可显著提高FeCo基纳米晶合金的初始磁导率,但同时降低了合金的居里温度。初步探讨了产生这种高温磁性变化的机理。
Temperature dependence of initial permeability was investigated from room temperature to 380~730℃.High-temperature magnetic properties and Ni content for Nix(Fe0.5Co0.5)73.5-xNb3Si13.5B9Cu1(x=5,10,15,20,25,30)alloys were analyzed by means of μi-T curves in heating-cooling cycles.Contrasted with nanocrystalline(Fe0.5Co0.5)73.5Nb3Si13.5B9Cu1 soft magnetic alloy,the initial permeability of FeCo-based nanocrystalline alloys were obviously enhanced when Ni content is x≥15;however,the Curie temperatures of the residual amorphous phase was decreased.The mechanism that the change of high-temperature magnetic properties was also discussed.
FeCo基纳米晶合金 / 居里温度 / 高温磁性 {{custom_keyword}} /
FeCo-based nanocrystalline alloys / Curie temperature / high-temperature magnetic properties {{custom_keyword}} /
[1]Yoshizawa Y,Oguma S,Yamauchki K.New Fe-basedsoft magnetic-alloys composed of ultrafine grain-struc-ture[J].J Appl Phys,1988,64:6044-6046.
[2]Yoshizawa Y,Yamauchi K,Yamane T,et al.Commonmode choke cores using the new Fe-based alloys com-posed of ultrafine grain structure[J].JAppl Phys,1988,64:6047-6049.
[3]Gilman J J.Flow via dislocations in ideal glasses[J].JAppl Phys,1973,44:675-679.
[4]Gleiter H.Studying on ultrafine particles:crystallogra-phy,methods of preparation and technological applica-tion[J].Prog Mater Sci,1989,33:223-315.
[5]Suzuki K.Cadogan J M.Role of the residual amorphousphase in the intergranular magnetic coupling in nano-crystalline magnetic alloys[J].J Magn Mater,1999,203:229-230.
[6]Wang Z.He K Y,Jin J,et al.J.Temperature dependenceof permeability for FeCuMSiB alloys[J].Mater Sci EngA,2001,1046:304-306.
[7]王治,张鹏,张东须,等.(FexCo1-x)73.5Cu1Nb3Si13.5B9合金高温磁性的研究[J].功能材料,2007,38:957-959.
[8]Han Y M,Wang Z,et al.Influence of Co content on thestructure and magnetic permeability of nanocrystalline(Fe1-xCox)73.5Cu1Nb3Si13.5B9alloys[J].Materials Scienceand Engineering Engineering:B,2008,156:57-61.
[9]近角聪信.磁性体手册[M].北京:冶金工业出版社,1984.
[10]Agudo P,Vázquez M.Influence of Ni on the structuraland magnetic properties of NixFe73.5-xSi13.5B9Nb3Cu1(0≤x≤25)alloys[J].J Appl Phys,2005,97:023901-1-023901-6.
[11]Elbaile L,Crespo R D,et al.Surface and bulk magneticproperties of amorphous and nanocrystalline Ni-substi-tuted FINEMET samples[J].Journal of Non-Crystal-line Solids,2008,354:5143-5146.
[12]Knipling Keith E,Daniil M W,Matthew A,et al.Fe-based nanocrystalline soft magnetic alloys for high-temperature applications[J].Appl Phys Lett,2009,95:222516-1-222516-3.
[13]Liu Y S,Zhang J C,Yu L N,et al.Magnetic and fre-quency properties for nanocrystalline Fe-Ni alloys pre-pared by high-energy milling method[J].Journal ofMagnetic and Magnetic Material,2005,285:138-144.
[14]Herzer G.Nanocrystallie soft magnetic materials[J].Phys Scr,1993,49:307-309.
国家自然科学基金项目(50871073);
/
〈 |
|
〉 |